Hardwood Flooring in Loyal WI 54446

Floor Installers

(866) 370-9746

Loyal, WI

  • Highly Rated
  • Quality Service
  • Affordable Prices
  • 100% WI Licensed Experts
open 24 hours - 7 days a week

(866) 370-9746

schedule an inspection & free quote

Loyal Floor Installers44 Reviews.
Hardwood Flooring,Bamboo Hardwood Flooring,Distressed Wood Flooring
Loyal Floor Installers
Loyal, WI 54446 USA
Phone: (866) 370-9746

Call Now

(866) 370-9746

open 24 hours - 7 days a week

Loyal WI 54446 Loyal WI 54446
Home > Wisconsin > Hardwood Flooring in Loyal WI 54446

Installing Laminate Flooring Loyal WI

A hardwood floor adds richness and beauty to any home. Being a perfect combination of strength and beauty, hardwood floors require their share of maintenance, too. There are certain steps that you can take to keep dirt, grit, and dust off of your floor.

Your hardwood floor is extremely vulnerable to dirt and dust, as they can cause scratches, dents, and Flooring Contractors Loyal WI even dulling. That is why, to keep a nice sheen on your floor, you must follow a regular maintenance routine to protect its beauty.

Know Your Floor

Before your get the mops out, you must determine the type of floor you have. You first have to find out if the floor is sealed (and with what), this is because a cleaning method Loyal WI depends on the type of finish you have and not the type of wood. You can always ask your flooring installer, or you can do a little test. Just rub your finger across the floor; if there is no smudge, then it is surface-sealed. If a smudge appears, then your hardwood floor has been treated with a penetrating seal, varnish, New Flooring Loyal WI lacquer, oil finish, or shellac and after the treatment, the floor has been waxed. Your floor is stain and water-resistant if it is sealed with polyacrylic, urethane, or polyurethane. These glossy floors are quite easy to clean, and proper sweeping and mopping will do the trick.

In the case of oil-treated floors, you will have to work a bit harder, as Loyal WI the oil finish gets soaked into the wood and hardens it from the inside. You must clean them quite carefully, with liquid wax or paste. You must treat you lacquered, varnished, or shellacked floors like an oil treated floor, as they too are not resistant to water. These floors require periodic waxing and buffing, apart from following specific cleaning procedures.

Keeping Loyal WI Out The Dirt

The first basic tip to maintain your floor is to keep it clean at all times. To prevent dust particles and dirt from scratching the wood, you need to keep the dust out. Use synthetic doormats at the entrance to collect dirt and moisture. Make sure to remember that you have to avoid mats that have adhesive or Loyal WI abrasive coated bottom.

Hardwood Floor Cleaning Tips

Follow these simple tips to make sure that your floor remains cleans and shiny:
• Wipe up any water or other spills on the floor immediately.
• Use recommended hardwood floor cleaners.
• At least once or twice a week, you must vacuum, sweep or dust mop your hardwood floor.
• Do not drag heavy Loyal WI furniture or any equipment on the floor.
• Add leg protector pads under all furniture legs.
• Keep relative humidity in your home between 35% and 55%, and always avoid direct sunlight from hitting your floor.

One essential tip for hardwood floor maintenance is that they should never be cleaned with water. Water destroys the wood, and causes Loyal WI it to swell up or become warped. Use the floor cleaning products best suited to your floor finish, and follow the instructions given by the floor installers.


Prefinished Hardwood Flooring Loyal WI


The kitchen, is the one room in your house that allows you to combine several styles and species of eco-friendly tile to enhance its look. You have so many options for creating your eco-friendly kitchen that it get overwhelming. Here are a few ideas for an eco-friendly kitchen tile remodel, and a few pointers to finding the best installer for the job. You can use one type or species Cherry Hardwood Flooring Loyal WI of eco-friendly tile or mix several throughout the kitchen. In either case, the ability to create your own magnificent vision is entirely up to you.

Your First Step

To begin your eco-friendly kitchen tile design, start by deciding what type of materials you want to use and make a list of your ideas. Next, find a qualified tile installation company that has experience dealing with eco-friendly tile. Unless, you have experience Loyal WI with kitchen remodeling, using a professional can save you a lot of precious time, personal physical labor, and money.

Choosing Your Tile

When making your wish list of possibilities, visual the combinations you can use to create your masterpiece. You can install mosaic tiles for the back splash and walls, a quartz tile countertop, and saltillo tile on the floor to bring together a great combination of eco-friendly tiling. With the Floating Laminate Floor Loyal WI many types and species of material available, the combinations are endless. There are dozens of different sustainable and recycled tiling, available in various colors and textures. Try to come up with a list of several different kitchen tile designs you might like. You can use the internet, magazines, and television shows to help inspire you.

Finding A Qualified Installer

Hiring talented installers with quality workmanship can help make sure you have Loyal WI a finished product your are proud to show off. More importantly, a professional with experience in eco-friendly tiling can help you pick the best combinations of tile that is suitable for each area. Make sure to get at least three estimates from kitchen tile design experts in your area. Ask for examples of other remodel designs they have completed, do they have the proper licenses to work in your Loyal WI city, and most importantly what they think about your ideas.

Final Thought

Now that you have decided on a company to remodel your kitchen, what material to use, and gave the go ahead to start, try being on site as much as possible to make sure everything is going smoothly. Keep an eye on as much of the remodeling process as you can. The more you actually see and a part Loyal WI of, the easier it is to make sure your remodel is a successful project.


Floating Laminate Floor Loyal WI


Vinyl Flooring – So Easy To Install, Even a Caveman Can Do It

Installing vinyl flooring can be a very easy home improvement project. TrafficMaster Allure vinyl flooring, for example, does not require any nails or adhesives, instead utilizing a floating system in which the vinyl floors are not actually attached to the subfloor. Consisting of vinyl planks that resemble hardwood, Wood Flooring Cost Loyal WI linoleum, or stone, it uses a patented installation system known as GripStrip, which allows contractors or home installers to fasten the planks to each other rather than to the subfloor below. By following these seven easy steps, anyone looking to install a vinyl floor can do so in a matter of just a few hours, using only a few simple Loyal WI tools and supplies.

7 Easy Steps to Vinyl Floor Installation

  1. Measure the room in which you are installing the vinyl flooring to determine how much material is needed. Multiply the length of the space by its width, and add an extra 10% to this figure to compensate for material lost to cutting. Be sure to place the material in the Laminate Flooring Underlay Loyal WI room for at least 48 hours before you begin installation so that it can get acclimated to the space, and set aside any extra material for future use after the installation is complete.
  2. Thoroughly clean the old floor or subfloor before installing the vinyl floor. Make sure to eliminate all dirt and debris.
  3. Begin by laying the first Loyal WI row of vinyl material along the longest wall of the room. Leaving a 1/8-inch gap at the base of the wall for potential expansion, attach the ends of each plank using the GripStrips by placing the strips on top of one another and then pressing them together firmly.
  4. Hold the second row of flooring at a Loyal WI 45-degree angle to the first one, and then align the GripStrips and press them together so that the rows are joined tightly. If you happen to make a mistake, be sure to lift the planks quickly to avoid the GripStrips from fully bonding, and then realign the planks until they are even.
  5. To cut the vinyl material, use a Loyal WI sharp utility knife and a straight edge such as a ruler.
  6. Stagger the joints along each row to make the finish of your flooring as stable and attractive as possible. Begin every row with either a full or partial plank, and then alternative as you move across the floor.
  7. Continue until you install your final row of flooring, and make Loyal WI sure to leave another 1/8-inch gap along the base of the wall. Add floor molding or trim to fill the expansion joints. Enjoy your new vinyl flooring!



Laminate Flooring Underlay Loyal WI


Prior to the arrival of the carpet installers you should have the room completely cleared of furniture. If you are unable to do this yourself or do not have others to assist you, make sure that you inform the floor covering company of this prior to their arrival so they can make necessary arrangements. Additionally, you will want to make sure that if you have children and/or pets they will stay out of the Fitting Laminate Flooring Loyal WI way so that they do not get hurt as there are a lot of sharp and dangerous tools that will be lying around while your carpet is installed.

Here is a very basic overview of a carpet installation. Obviously there are more detailed steps; after all you are not installing it as this is truly a craft. This article is designed to give you a general understanding and what you can expect.

First you need to Loyal WI know if you have a glue down carpet or a stretch in carpet. If you have a carpet that needs to be stretched in here are some keys to look for:

1. The old carpet needs to be removed, debris has to be removed, and the floor must be vacuumed.

2. Tack-strip should be installed around the entire parameter of the room with the exception of doorways. Basically it is a relatively thin piece of would Fitting Laminate Flooring Loyal WI that has spikes and gets nailed down with the spikes facing the ceiling. The purpose of tack-strip is to make sure that the carpet holds tight after it has been stretched over the tack strip.

3. Next, the pad is stapled to the floor. Note, if you have a concrete floor than the pad will be glued down or there will be no pad and it will be a direct glue down. The pad should Loyal WI never be installed over the tack-strip.

4. The installer should then bring in the carpet and roll it out. Make sure that the carpet is going in the proper direction. You would be amazed how many times this gets messed up when you do not have trained professional installers.

5. Then the installer should prepare for seams. Some rooms will not need a seam while others will. You’ll want to make sure that the installer is Loyal WI being cautious and making straight cuts. In general, the straighter the cut, the easier it will be to seam the carpet as well as blend the seam so it is not noticeable. Note that carpet is commonly manufactured in 12 foot widths. Thus, if you have a room wider than 12 feet you will more than likely need a seam

6. Seams: As stated, cuts need to be straight, the installer will use seam tape Loyal WI and a seaming iron. Once the carpet is cut straight, the two pieces of carpet need to be seamed together. Seam tape will be placed underneath the carpet where the seam is to be joined, then seam tape will be heated and once the glue become hot enough, the edges of the carpet will be carefully pieced together and then placed into the hot glue. Once the glue is cooled, the carpet will be Loyal WI seamed together permanently. * If you have sculptured carpet be sure that the pattern/design are going in the same direction. There is nothing worse than having carpet going in two different directions.

7. Once the glue has dried from the seam, or if you do not need a seam, and the padding is down, it is time for the carpet to be stretched over the tack strip. The installer can utilize a power stretcher or Loyal WI can kick it in with a kicker. The carpet should be stretched so that it is a few inches over the tack strip so that it can then be cut to size.

8. The excess carpet that is over the tack strip should be trimmed so that it is flush with the wall. Be sure that the carpet is attached to the tack strip prior to trimming the excess carpet. Once the carpet is trimmed, Loyal WI the installer should then take the trimmed edges and tuck them in where the wall and the floor meet utilizing a hand tool.

9. Once the carpet is properly installed, the installers should clean up after themselves, removing all scraps, vacuuming the carpet, hanging any doors that needed to be removed.

10. If you had the installers move furniture be sure that you are present when they move the furniture back into place. Remember that they Loyal WI install carpet for a living and not move furniture. They may not take the same caution as you would so supervise all furniture moving.

Although this is a very basic description of how carpet is installed, it should help you have a basic comprehension of carpet installation prior to your own carpet installation.

Note: It is very important to have children and pets safely out of the way when your carpet is being installed, as most Loyal WI tools used to install carpets can be hazardous.


Installing Laminate Flooring Loyal WI


Knowing how to lay ceramic tile is not too difficult, but if you’ve never done it before and aren’t very handy to begin with you might be better off with a professional. Having said that many homeowners have attempted their own remodeling, but the fact remains

that there are some projects, such as installing ceramic tile floors and even painting that are tackled by the New Hardwood Floors Loyal WI homeowner.

When installing ceramic tile for the first time, make sure you do your homework. So why would you install ceramic tile floor? Most people believe, and rightfully so, that installing ceramic wall tiles and flooring is an attractive and hard wearing surface ideally suited to an installation in bathrooms and kitchens.

Some homeowners lay their ceramic tiles in areas other than wet areas like family Loyal WI rooms and dining rooms. These

installations tend to be found in parts of the world that typically have long hot summers and mild winters, or humid tropical climates. The benefit is having a cool, hard wearing and easy to clean surface.

Patience and resilience are prerequisites on how to lay tile, having the correct tools for the job is a must. Preparation is the key. If Floating Hardwood Floor Loyal WI you are installing ceramic wall tile start with the walls first if you are have a project that involves both wall tiling and floor. Floor tiles are typically thicker than wall tile as they do not require the thickness needed for impact resistance that floor tiles require.

Gather your tools, do a check to see if they are all there. Grout, measuring tape, spongese, adhesive, Loyal WI markers or pencils, glass cutters, tile spacers, rubber mallet, steel square, trowel and buckets are some of the tools you will need.

Pre installation floor and wall preparation is key to a successful install. All old flooring and wall paints must be removed, thorough cleaning of the surfaces and any undulating surfaces need to be leveled off first. Some flooring may require special underlay material Loyal WI which creates a solid secure surface for the tiles to adhere to without the risk of surface movement creating cracks at later date.
Concrete floors tend to provide a surface which is stable to lay on, but if the concrete is new as in a new home, the concrete may settle over time creating splits and therefore cracking the tiles that were laid on Loyal WI top of it. There is not much the installer can

do to prevent this from occurring unless the installer lays a cement fiber board underlay which of course increases the installation cost. in wet areas it is important to install this cement fiber board first for moisture and movement correction.

One of the ways the homeowner can express themselves is by being creative in the design Loyal WI of the tile layout. Many patterns are available which can enhance the overall effect of the wall and flooring. Dull boring designs can ruin a possibly beautiful

installation, so some thought before starting will pay dividends for years to come.

Dry laying a section of tiles before applying adhesive can help in deciding how the design will be installed. You will get a much better idea Loyal WI of how it will look and feel before committing to final laying. It is much better to do this now than after adhesive has been applied. It can also give the installer an idea as to how many half tiles will be needed and can reveal some difficult cuts that may be required.

Installing Ceramic Tile

This is where the tires hit the road. No amount Loyal WI of preparation can help an installer who does not get this right. The skill required to lay ceramic tile is understated, having the right knowledge can make an installation look and feel 100% better than an installation by someone who did not do their homework prior to commencement.

Cutting and fitting tiles is one area most homeowners need instruction on how to best trim and Loyal WI cut those tiles. It can take some skill to get the right cut to fit around those protrusions like bathroom pipes and electrical fittings. This is one area that screams of a poor installation if not done properly. The right tools for the job here really do make a difference. Tile cutters and glass cutters are a must, further tools if required could include Loyal WI an electric wet saw but these tend to be only used by professional tile installers or on large projects.

After installing a few rows of tiles, set them into the adhesive with the tile leveler and a mallet. After setting all the whole tiles across the room, start to cut tiles to fit around the perimeter of the room. Tiles can be snapped by hand Loyal WI or with tile nippers, tile cutters or using a wet saw.

The grouting of the laid surface is a somewhat pleasurable experience as it signifies the impending completion of the project. After applying the grout clean the surface with a damp sponge. Finish seams with some silicone sealant in appropriate areas smoothing the sealant with a wet finger.

Allow all work surfaces time to cure and Loyal WI set, a week is normally enough time to consider it ready for full human encroachment. Stand back and observe a job well done. Of course, all the above is just barely a fraction of what information a homemaker will need to ensure an impressive installation. Reading up and gathering detailed instruction on ceramic tile installation beforehand will be the prerequisite of a wise and Loyal WI successful project.

  • Hardwood Flooring in Muscoda WI 53573
  • Hardwood Flooring in Spring Green WI 53588
  • Hardwood Flooring in Cambridge WI 53523
  • Hardwood Flooring in Manawa WI 54949
  • Hardwood Flooring in Viola WI 54664
  • Hardwood Flooring in Ellsworth WI 54011
  • Hardwood Flooring in Sherwood WI 54169
  • Hardwood Flooring in Oakdale WI 54649
  • Hardwood Flooring in Barron WI 54812
  • Hardwood Flooring in Baraboo WI 53913
  • Local Results

    • Water Heater Installation Reviews Pg. 1 - The Home Depot

      Your water heater can be installed the same day Monday-Friday if your phone consultation takes place before noon and you are within 30 miles of a Home Depot store*.
    • http://www.westlaw.com/

      We would like to show you a description here but the site won’t allow us.
    • Design Tips | The Original Frameless Shower Doors

      Always pitch seats and shower floor pans so the water drains properly to the drain area. You do not want water to be stagnant or puddling will occur.
    • Working Warriors

      Canada was chosen as it is one of the world's biggest pea producing countries accounting for 30% of global production. The Manitoba region provides a number of ...
    • Foam Board Insulation - R Values and Types

      Foam board insulation products types and sizes. Learn about R values, uses and benefits of insulation board. Read more about this DIY guide to foam board.
    • Lowes Corporate Office - COHQ

      Lowe’s was originally founded in 1921 by Lucious Lowe in the form of Lowe’s North Wilkesboro Hardware in Wilkesboro, North Carolina. Lucious died in 1940 and the ...
    • Top 259 Reviews and Complaints about Costco - Tires

      Everyone that complains about Costco installing new tires on the rear axle, I again recommend that you do some research. It is done to protect you in wet weather ...
    • Google

      Search the world's information, including webpages, images, videos and more. Google has many special features to help you find exactly what you're looking for.
    • News - LMC - Building Business Together

      Hancock Lumber is proud to announce their acquisition of Mainely Trusses, a market-leading roof and floor truss manufacturing facility based in Fairfield, Maine.
    • McLeodGaming

      Wanna win a $100 Amazon eGift Card and more? There’s still one week left to enter our Ms. Carrot’s Stage Builder Rage Builder Contest for Yeah Jam Fury: U, Me ...

    Cash & Check Our Loyal Floor Installers experts accept all forms of cash and checks payments.

    Credit Card Yes, credit card payment is accepted by our Loyal experts.

    Offers & Discounts Special offers may be available in Loyal WI. Ask when you call.

    Other Options Other payment options may be available. Please call for more info.