Hardwood Flooring in Pasadena MD 21122

Floor Installers

(866) 370-9746

Pasadena, MD

  • Highly Rated
  • Quality Service
  • Affordable Prices
  • 100% MD Licensed Experts
open 24 hours - 7 days a week

(866) 370-9746

schedule an inspection & free quote

Pasadena Floor Installers410 Reviews.
Hardwood Flooring,Bamboo Hardwood Flooring,Distressed Wood Flooring
Pasadena Floor Installers
Pasadena, MD 21122 USA
Phone: (866) 370-9746

Call Now

(866) 370-9746

open 24 hours - 7 days a week

Pasadena MD 21122 Pasadena MD 21122
Home > Maryland > Hardwood Flooring in Pasadena MD 21122

Laying Laminate Flooring Pasadena MD

One of the most daunting DIY flooring projects is installing carpet. Many people are intimidated by the thought of installing carpet, feeling that it is beyond their abilities. This is in large part due to the special tools required. However, installing carpet is actually a fairly easy DIY flooring project and by doing it yourself, you can save a great deal of money in installation costs.


Installing carpet does require some specialty tools. Contract Flooring Pasadena MD These include a knee stretcher, power stretcher, seam iron, seam roller, wall trimmer, and stair tool. However these tools can be rented from your local rental store. This is much more cost effective than purchasing the tools.

You will also need a carpet knife, hammer, tack strips (also referred to as tackless strips), staple gun or hammer stapler, and carpet seam tape.

Preparing Floor

It is very important to prepare the floor properly before installing Pasadena MD carpet. Carpeting can be installed over cement, wood, or linoleum. However, if the flooring is damaged, it is best to remove or replace the damaged subfloor. Take this time to repair any squeaks in the floor due to loose boards.

The subfloor should be cleaned thoroughly before installing your carpet. You don’t want any dirt or debris underneath which can damage the padding and carpet. You should remove any floor registers and if Fitting Laminate Flooring Pasadena MD you have doors which swing into the room, it is easier to remove the doors rather than try to work around them.

Installing the Padding

Before installing the padding, you will need to install tack strips along the edges of the walls and around floor register openings. Do not install the tack strips in front of door openings. These strips should be installed about 1/4″ from the wall with the tacks leaning towards the Pasadena MD wall. Most tack strips will already have nails in them for nailing to the flooring. If you have a cement floor, you may need to glue the strips down using a masonry adhesive.

The next step is to roll out your padding, starting along one wall. Overlap the tack strips by approximately 3-4 inches, making sure the padding remains smooth and straight without bunching. Use a staple gun or hammer stapler to staple Pasadena MD the padding to the carpet, placing a staple every 6 inches or so. If you have a cement floor or do not want to damage the underlying floor, you can use adhesive to installing the padding.

You can use duct tape along the seams to help keep them from bunching when you install the carpet. When you have completed the padding installation, use a utility or carpet knife to cut the padding along Pasadena MD the tack strips, making sure that the padding does not overlap the strips. Cut out any floor register openings along the tack strips as well.

Installing Carpet

Roll the carpet out in the room, again starting along one wall and leaving 3-4 inches of overlap along the walls. Make sure to keep the carpet straight and be careful not to allow any of the padding to bunch up under the carpet. Cut out the Pasadena MD floor register openings, also leaving a couple inches of overlap over the tack strips.

If you have more than one section of carpet, you will have to create a seam. Place seam tape beneath the seam with the adhesive side up. Heat your seam iron and then starting at on wall, place the iron directly onto the seam tape until the adhesive melts and press both edges of carpet onto the tape. Use Pasadena MD a seam roller or other smooth heavy object to press the seam together and into the adhesive. Follow this process along the entire seam, doing a small section at a time.

Starting in one corner, use the knee stretcher to install the carpet to the tack strip. Place the head of the kicker a few inches from the wall and kick the pad sharply with your knee. Repeat this process every 6-8 inches Pasadena MD along the wall. Once that is complete, we will use the power stretcher to install the carpet along the other walls. Place one end of the power stretcher along the wall you just completed and the head of the stretcher along the opposite wall, about 4-6 inches from the wall. When you push the lever down, the carpet is stretched over the tack strips. Repeat this along the entire wall as well Pasadena MD as the remaining walls. Use the knee kicker to stretch the carpet over the tacks along any floor register openings.

When the carpet has been attached to all of the tack strips, use the wall trimmer to cut the excess carpeting along the wall. This will keep the edges straight and gives us a close cut. Using a stair tool or stiff putty knife, tuck the edges of the carpet underneath the baseboard Pasadena MD along the wall.

Finally, install door edge strip in doorways to cover the carpet edge and make a transition into the next room. Replace your register covers and you are done!

As you can see, installing your own carpeting can be fairly easy if you have the right tools and instructions. So when you are getting ready for your next DIY flooring project, don’t shy away from carpeting due to installation costs. Install it Pasadena MD yourself and save some money!


Laying Wood Flooring Pasadena MD


Protective clothes and safety apparel items such as a disposable lab coat include a wide range of styles and types from which to choose. Each one has its own set of benefits and works hard for you at home, or in the workplace. If you have been trying to decide which piece of safety apparel is best for you, you need to know what’s on the market and how they work best.

Head Coverings

If you Hardwood Flooring Cost Pasadena MD are doing any kind of painting or work in an environment where everything is airborne, covering your head is a must. While you can purchase full disposable suits that already have headgear attached, you can purchase hoods on their own to add to regular coveralls or other clothes to keep your hair clean.

Full Disposable Suits

In messy situations or if you are working with chemicals that you don’t want to make contact with your skin, Pasadena MD full disposable suits work best. This style varies from light disposable coveralls to plastic biohazard suits. They come with or without boot covers, hoods, and elastic cuffs. You get full body protection without having to put on several pieces, or worry about the particulate or chemical matter getting in between them. Painters, asbestos specialists, and drywall installers are just some of the professionals that use these items on a regular basis.

Covering Your Upper Body

A Laminate Hardwood Flooring Pasadena MD disposable lab coat is a great option for professionals and individuals at home. You can slip a disposable lab coat on quickly and easily. You can easily switch from dirty to clean and contain the mess if you have an interruption. A disposable lab coat is also inexpensive enough to replace as frequently as you need to in order to stay safe and clean.

Many art fanatics and food service workers prefer a disposable apron. Pasadena MD This eliminates the hassle of trying to get paint, clay, grease, and other stains out of their clothes. Many will even pair this with a protective shirt for added protection. These are just like a regular shirt except they resist chemicals, particulate matter, and other substances.

Lower Body Protection

While a protective apron does offer your legs and lower body some protection, disposable pants will give you far better protection. At home, they are ideal for Pasadena MD cutting the lawn or spraying pesticides. Many businesses also use safety pants, especially those involved in landscaping, cleaning, and floor finishing.

In addition to protecting your legs, you will likely want to have safety apparel for your feet as well. For this purpose, consider using disposable shoe covers. They work well for yard clean up and home renovation projects. Professionally, the possibilities are endless. Real estate experts use them to keep homes in pristine condition. Pasadena MD Medical staff uses them to prevent contaminating rooms with germs. Construction experts and contractors use them to help keep sawdust and other materials contained in one area.

Protective clothes come in all different styles and types to provide you with the highest level of safety in any situation. Select a disposable lab coat or other items, mix them together, or use them on their own to stay safe and clean. You can Pasadena MD choose the items you need so you can work comfortably, whether that is at home or in a commercial setting.


Laminate Hardwood Flooring Pasadena MD


The texture and quality of a carpet is determined by the way it is made, or constructed, and the finish applied to the fiber tufts or pile. Test the pile density in the shop by bending the carpet sample back, pile side toward you. The less backing you can see, the better the carpet.

Woven Carpets

Traditionally, the strongest and most expensive carpets have always been woven on looms. The term broadloom Laminate Flooring Pasadena MD refers to any carpets over 3ft wide. The fibers are woven into the backing to form a dense, strong pile. There are two types of weave commonly used for broadloom carpets:

In Axminster carpets, pile is woven into the backing material, a row of U-shaped tufts at a time. This weaving method allows a wide range of colors to be used to create quite elaborate patterns, although plain and simpler designs Pasadena MD are more popular. The pile is always cut; it can be short and smooth or long and shaggy.

In Wilton carpets, the pile is woven from continuous yarn, so that the fibers are buried in the backing to make a high density, hardwearing carpet. It is available with a cut, loop, and cut and loop pile.

Tufted Carpets

In modern tufted carpets, the yarn is inserted into the backing material, bonded in place Flooring Companies Pasadena MD with latex and then backed again with foam or fabric for extra strength. The loops of tufted carpets may be either cut or uncut, or a combination of cut and loop. They are quicker and more economical to make than woven carpets, so are generally cheaper, but can be as high in quality.

Bonded Carpets

These are made by bonding the pile fiber to a woven or foam backing, rather than tufted Pasadena MD through it. This gives a smooth finish, but is usually limited to plain colors.

Carpet Tiles

These are squares of sealed edged carpet backed with PVC or rubber. They come in many colors and several finishes, from corded for heavy wear to soft pile for use in bedrooms and bathrooms. Fitted wall-to-wall, they marry the luxury of a carpet with the practicality of a tiled floor. Not only can the tiles be Pasadena MD laid more simply than a carpet and in attractive patterns, but they can also be lifted again separately when they need cleaning. Individual squares can be turned or moved to distribute wear evenly, prolonging the life of the flooring.

Carpet Laying Terms

You are quite likely to hear the following expressions when buying a carpet:

Fluffing refers to loose fibers left on the surface of the carpet. They appear during manufacture and continue Pasadena MD to work their way to the surface during the first few months of wear. They disappear with regular vacuuming.

Pilling describes small balls of fiber left on the surface of nylon or nylon mix carpet. It is usually a manufacturer’s fault.

Grinning is what happens when you bend a carpet back over your hand and the backing shows through the pile. This is a sure sign of a low-density pile, particularly on Pasadena MD Axminster carpets. Do not use carpets which grin on stairs.

Sprouting is the term applied when strands of thin woven backing material, such as jute, appear or “sprout” through the pile. This is no cause for concern – simply trim away the loose ends with sharp scissors.

Shading refers to the light and dark patches that may appear on cut-pile carpets, particularly plain-colored velvets with synthetic fibers. It does not affect the Pasadena MD life of the carpet and has the benefit of disguising dirt and stains.


It is worth spending money on a good padding to prolong the life of the carpet, increase comfort and warmth, and provide sound insulation.

Padding is always laid beneath a carpet, unless it is foam backed. Buy new padding to use with a new carpet. Several types are available: be sure to match the type to the kind of Pasadena MD carpet you are laying. The carpet showroom will advise on the most suitable one to use in each case.

Some installers line the floor before putting padding down on floorboards. This prevents vacuuming from drawing dirt up into the pile. On foam-backed carpets, the lining stops the backing from sticking to the floor. Lining sheets come in paper or nylon, usually in 78in widths.


Floating Hardwood Floor Pasadena MD


Ugh….there is nothing like a split seam, stain that can’t be removed or pet scratch & nothing is worse than bubbles in your carpet…what to do from here? Carpets are complex and do take special training and require a professional with the experience to get it done right! From the bubbles in your carpet to the dog scratch from Fido our certified & trained professional technicians are Installing Laminate Flooring Pasadena MD up for the job! We will bring your carpet back to a original condition as much as humanly possible!

Carpet Stretching: Removes Bubbles & Wrinkles

How it Works
Carpet bubbles and carpet wrinkles but there is a solution! Stretching carpet is far more complex that it appears. It takes real knowledge, skill & a desire for excellence on part of the technician to do it right. It takes time Pasadena MD to a re-stretch well. It is important to use quality equipment like power stretchers to insure the stretches durability and quality. Knowing how to stretch is important so seam are not damaged or affected negatively.

Most often stretching is required due to poor installation. Also carpet can become un-tacked from the edges during furniture moves or pushing heavy items across the floor. Some carpets will also being Hardwood Floor Refinishing Pasadena MD look over time just from normal wear and tear.

Carpet Seam Repairs

How it Works
Carpet Seam repairs are very common as a good carpet installer is increasingly harder and harder to find. Poor installers use just a seam tape to mend carpet because it is quick and easy, but not durable. It is important to repair or install carpet with seams that are mended with a commercial seam Pasadena MD iron & professional grade supplies. Most often seam repairs are due to poor installation in the beginning.
Carpet Patches

How it Works
Patching carpet is required for a variety of reasons: from spots that can’t be removed, pet tears to carpet burns. It takes real knowledge, skill & a desire for excellence on part of the technician to do it right. It takes time to do a patch Pasadena MD well. It is important to use the quality standards as mentioned in the seam repairs section above since the patch in essence is a seam repair on 4 sides of a new piece of carpet.

Carpet Accessory Repairs/Replacement

How it Works
Carpet accessory repairs or replacements are needed for a variety of reasons and can be very complex at times. Some sub-floors are wood and installation is easier however, Pasadena MD more often sub-floors are concrete and take specialized tools to install a simple tack strip.

Flat Bars & Grippers are used for transition areas from carpet to a hard surface floor. Tack strips hold carpet in place along sides of walls.

Carpet Dyeing & Spot Dyeing

How it Works
Spot dyeing is good for a variety of carpet blemish issues. It is important to understand that dyeing carpet is not Pasadena MD always guaranteed and cannot always be matched exactly. It depends on what caused the carpet blemish will determine the success of the spot dyeing. When a spot dye is not successful we recommend doing a carpet patch as explained in section above. The type of carpet will determine if it can even be dyed. Our technicians can do a fiber test to determine if your carpet can Pasadena MD be dyed.


Contract Flooring Pasadena MD


In principle, Fiberglass Pools may seem to be the easiest type of pool to install. Just dig a hole and drop it in…right? In theory that’s correct, but it’s not quite that simple. In fact, installers make mistakes all the time, and a poorly installed pool makes for an unhappy pool customer. So if you are considering the purchase of Laminate Flooring Cost Pasadena MD a fiberglass pool you’re in luck. We’re about to discuss the 5 Keys to a successful fiberglass pool installation. Let’s jump right in!

Key #1: A Solid Foundation
This may seem like a no-brainer but it is the culprit behind the failure of many pool installations. Here are a couple things to watch out for:
o Setting the pool shell on Pasadena MD disturbed soil- When the hole is being dug, if the excavator accidentally digs too deep there is a tendency to build that area back up with the same soil. That’s a big no no! The area must be brought up to grade with a compactable base material. If this is not done correctly, the ground will eventually settle and so Cherry Hardwood Flooring Pasadena MD will the pool. It doesn’t take a brain surgeon to know that means trouble.
o Uncompacted base material- After the hole is excavated a leveling material such as sand or gravel is dumped in the hole and is leveled as a base for the pool shell to rest on. If this material is not properly compacted the pool will settle Pasadena MD over time.
These problems can be easily avoided by the contractor by taking the necessary time to insure the pool rests on a solid foundation. We have written extensively on this topic and are proponents of clean crushed gravel as a base material.

Key #2: Sound Pool Leveling Methods
Because a fiberglass pool is a one piece unit it is not Pasadena MD realistic to expect that it will be perfectly level. The industry standard states that the pool can be up to one inch out of level in forty feet. We shoot to get the pool within a quarter but will settle for a half-inch. I have seen installers will use any means under the sun to get the pool shell level Pasadena MD and some methods are perfectly fine, and others are frankly kind of scary.
We teach that the best method to level a fiberglass pool is to completely lift the pool out of the hole and either add or take away material to get the pool to the desired level. We also teach to walk the pool floor after the shell Pasadena MD is set to insure the entire pool is resting on base material without voids. These two techniques will insure that the pool is not only level, but resting in its natural state and free of disproportionate stress at any point.

Key # 3: Sound Plumbing
What we’re really talking about here is the “L” word: leaks! Yes it is a dirty Pasadena MD word, especially in the pool business. There are 3 things an installer should do to protect against leaks:
o Secure the plumbing- Because fiberglass pools have a tremendous amount of backfill material that can settle over time, it’s necessary to secure the plumbing to insure that it doesn’t move. Plumbing settlement results in leaky fittings in the pool and is Pasadena MD a major pain to repair. We tie our plumbing up with cable to protect against any settlement.
o Use rigid PVC pipe- There are two predominant types of PVC used around inground pools, flex pipe and rigid pipe. Flexible PVC, as its name implies, will easily contour with the shape of the pool and make for a quicker installation. The Pasadena MD problem with flex pipe is that it is not suitable for underground use according to the manufacturers of the product. They state this because the material is susceptible to damage from termites. We have also found that the pipe is prone to collapse under pressure and that the glue joints do not hold as well. Rigid pipe on the other Pasadena MD hand, is much more durable and can also be contoured to follow the pool shell by a process called heat bending that we teach via video. This gives you all of the flexible advantages of flex pipe with the durability of rigid pipe. You simply have to be willing to invest the time to get it done.
o Pressure Testing- Pasadena MD This should never be neglected. It’s better to find a leak now than later, especially if later is after the concrete patio is poured! This is pool install 101, but there are many contractors who still don’t pressure test their plumbing.

Key #4: Good Backfill Procedure
Backfilling the pool shell is a process that can have serious consequences if done improperly. Pasadena MD Here are some backfilling guidelines:
o Bring the backfill material up on the outside of the pool with the water level on the inside of the pool. This keeps relatively equal pressure on the walls of the pool.
o Compact the backfill material to insure minimal settlement. Sand backfill requires saturation with water every six to twelve inches of lift. Pasadena MD Clean gravel backfill compacts on placement and requires no additional compaction methods.
o Pack the steps and seats with backfill material to eliminate voids as much as possible. This is done by literally crawling under the pool and stuffing backfill material into the area with a board or other tool. It’s important to make sure there is at least a Pasadena MD foot of water in the pool before beginning this process so the entire pool is not lifted from the ground.
o Brace large steps and benches with block to protect against sagging.
If backfilling is done improperly excessive settlement, bulged and crooked walls, or sagging steps and benches are some of the consequences. We are also huge proponents of clean Pasadena MD crushed gravel as a backfill material.

Key #5: Quality Cantilevered Coping
A perfect pool installation can all be for naught if the coping of the pool is of poor quality. In many respects the coping can either make or break the entire job. Cantilevered concrete coping is poured in place on top of the pool and is a skill that requires Pasadena MD significant experience to master. The two primary steps to producing successful cantilevered concrete are:
1. Proper form installation- Because the forms must contour with the pool, Styrofoam is the material of choice. The forms must be installed so they are secure enough to withstand the pressures exerted by the concrete and true enough to maintain their desired shape.
2. Proper Pasadena MD concrete placement- As the concrete is placed against the form it is necessary to remove air pockets by tapping vigorously against the outside of the form.
A good cantilevered coping job will be free of significant air pockets and exposed gravel and the surface will be uniform and relatively smooth.

Well there’s some food for thought for those of you considering Pasadena MD the purchase of a fiberglass pool. Based on my experience it would be wise to devote as much energy to finding the right pool contractor as the right pool manufacturer.

Cash & Check Our Pasadena Floor Installers experts accept all forms of cash and checks payments.

Credit Card Yes, credit card payment is accepted by our Pasadena experts.

Offers & Discounts Special offers may be available in Pasadena MD. Ask when you call.

Other Options Other payment options may be available. Please call for more info.